Nov 3, 2025

Maintenance & Lifespan of the Ozone Water Machine Pro

For surface cleaning only; not intended for consumption or medical purposes.

Yes, when applied correctly for surface cleaning and according to instructions.

Check at ~1,000 hours or ~500,000 litres. Replace only with visible wear or lower output (parts ~€75).

No filters are required, simplifying maintenance and reducing costs.

Keep the unit clean, log hours/litres, and follow the two‑cloth method for controlled application.

Keep your Ozone Water Machine Pro reliable with minimal maintenance and maximum lifespan.

Practical maintenance tips for the Ozone Water Machine Pro. Check after ~1000 hours or 500,000 litres; replace electrodes if needed (~€75). BPR‑safe.

Schedule a check at ~1,000 hours or ~500,000 litres. Verify flow, tubing and fittings, and visually assess the electrodes.

If performance is stable the electrodes can often run longer. With clear wear or reduced output: replace. Typical parts cost: ~€75.

Wipe the housing with a damp cloth and dry immediately. No filters required; ensure room ventilation where applicable.

Mist the surface or cloth, clean in overlapping passes, then dry immediately with cloth B. Work from cleaner to less clean zones.

You make cleaning water from tap water: fewer bottles and logistics, less storage, chemical‑free. Maintenance is limited and predictable.

What is ozone water? · Ozone water machine · Guides · Contact · Two-cloth method · All products (shop)

Frequently Asked Questions

For surface cleaning only; not intended for consumption or medical purposes.

Yes, when applied correctly for surface cleaning and according to instructions.

No filters are required, simplifying maintenance and reducing costs.

Keep the unit clean, log hours/litres, and follow the two‑cloth method for controlled application.