Installing and connecting an ozone water machine safely

Installing and connecting an ozone water machine safely

This guide contains a complete blog series on ozone water machines for surface cleaning. This article focuses on installing and connecting an ozone water machine or ozone water device so you can work safely, BPR-compliant and step by step. In this context ozone water is used only for cleaning surfaces and is not intended for consumption or medical use.

Preparation: location, water and power

Start by choosing a stable location for the ozone water device. The unit should be easy to reach for the cleaning team and close to a water tap and grounded outlet. Estimate your peak demand in liters per hour so the capacity of the ozone water machine matches your daily use.

• Check for a grounded outlet near the mounting position.
• Verify that hose lengths are sufficient for the planned route.
• Plan staff movement around the machine to keep walkways clear.

Installation steps for the ozone water device

Mount the ozone water machine according to the manual and work calmly without skipping steps. Connect the water supply using the supplied hose or a suitable adapter. Inspect every connection for play and tighten by hand until snug so leaks are less likely when producing ozone water.

• Fix the wall or floor bracket according to the instructions.
• Connect the water line and check for leaks.
• Only switch on the machine once all fittings are secure.

Power supply and first test

Connect the ozone water device to a grounded circuit and avoid extension cords running through walkways. Then perform a first test run at a low flow rate. Let the system flush briefly according to the manual and check that ozone water flows steadily from the outlet. During the test hold a cloth under the outlet to reduce splashes.

• Open the main tap and confirm pressure.
• Start the rinse function for the recommended time.
• Watch the first liters to confirm all joints remain dry.

Workflow with the two-cloth method

Spray onto the cloth for controlled application or directly on closed surfaces such as tables, floors or tiles. Workflow: two-cloth method — 1) Lightly mist ozone water. 2) Clean in overlapping passes with cloth A. 3) Immediately dry with cloth B for a streak-free finish. Work from cleaner to less-clean areas to keep routines consistent.

Costs and affordability

At roughly €0.0017 per liter you can produce your own cleaning water straight from the tap. The investment in an ozone water machine or ozone water device is balanced by the fact that you no longer need bottled products and have less storage.

✔️ No expensive bottles or logistics

✔️ Less plastic and less storage space

✔️ Chemical-free cleaning workflow with simple steps

✔️ Easy to integrate into existing routines

After around 1000 hours or 500,000 liters you typically budget about €75 in wear parts for preventive maintenance.

Customer stories & testimonials

• “Once the machine was installed centrally, back-of-house cleaning became much more relaxed.” – Hospitality
• “Because the ozone water machine hangs close to the tap, hoses stay short and tidy.” – Facilities
• “New staff quickly understand the two-cloth method thanks to the fixed order of steps.” – Cleaning team

💬 Want advice on installation at your site? Contact our team.

Articles in this guide

This is one of the in-depth blogs within our guide on ozone water machines. Go back to the main guide or browse other topics in the same blog series.

Guide: buy an ozone water machine

Internal resources and manual

• What is ozone water?
• Ozone water machine
• Guides
• Contact
• Two-cloth method

Further reading

What is ozone water?
Ozone water machine
Guides
Contact
All products (shop)