top of page

30 okt 2025

Ozone water machine maintenance: schedule, costs and reset

Minimal upkeep: after ±1,000 hours or 500,000 L check electrodes; parts about €75; reset for another 1,000 hours (BPR‑compliant use).

Maintenance guide for ozone water machines

Ozone water machine maintenance: after 1,000 h/500,000 L inspect electrodes, parts ~€75, reset and continue. Surface cleaning only.

Maintaining your ozone water machine (schedule, costs, reset)

Maintaining your ozone water machine (schedule, costs, reset)

After ±1,000 hours or 500,000 litres, inspect electrodes; parts are typically ~€75. Reset the interval and run another 1,000 hours. Strictly for surface cleaning (BPR‑compliant).

 

Maintenance cycle

1) Track hours/volume → 2) Inspect electrodes → 3) Replace parts if needed and reset.

 

  • ✅ Interval: ~1,000 h or ~500,000 L
  • ✅ Parts: ~€75
  • ✅ Downtime: short and predictable

 

Daily workflow

Light mist, overlapping strokes, immediate dry with cloth B.

Two‑cloth method

 

Customer stories & testimonials

 

  • Facilities — Fixed intervals keep planning predictable.
  • Retail — Fewer product changes and stock moves.
  • Hospitality — Short checks, quickly back at full capacity.

 

 

Troubleshooting

If output dips: check filter, hoses, run the rinse cycle, re‑measure. If unresolved, schedule maintenance earlier.

 

Back to the hub

Buy an ozone water machine (hub)

 

Further reading

What is ozone water?
Ozone water machine
Guides
Contact
All products (shop)

What can I use ozone water for?

For surface cleaning; not intended for consumption or medical purposes.

Is ozone water safe?

Yes, when applied correctly for surface cleaning and according to instructions.

When should I schedule maintenance?

About €75 for wear parts during the electrode check.

What if output drops?

Check filter and hoses, run the rinse cycle, re‑measure; otherwise bring the check forward.
bottom of page